Description

Important Information on Carbon Monoxide Detector Placement. Family room: CO alarm should be near ‘nostril height’ which is around the light switch height. Bedroom: should be even lower. CO is almost the same weight as air and does not rise like smoke. Some folk mistake CO for CO2 and shop for a co2 detector or a co2 meter, but it is in point of fact a carbon monoxide monitor that is necessary to avoid the harmful symptoms of carbon monoxide poisoning. Carbon dioxide poisoning doesn’t happen in the home. If you cannot have one in each bedroom, have at least one for every level of your home, including the basement. A carbon monoxide alarm is just as important a life saving device for the home as fire extinguishers are in the kitchen. Protect your family from the symptoms of carbon monoxide poisoning with a High Quality CO Detector. Using the latest technology Electrochemical sensors, you’ll be able to rest assured our unit is often monitoring the air for any sign of Carbon Monoxide. Important: “Battery Operated” Some US States require battery operated or battery back-up units. Plug-in units may seem to be convenient, but when the power goes out, the gas or wood heater normally goes on. This is when CO detection is most imperative. Our Battery Powered units do not use electric power. They aren’t plug in units. Never be complacent about an alarm, as CO can have an effect on your judgement. It the alarm sounds, there IS a problem. Don’t ignore it! CO Detectors should be easy to use and install. Our model comes with an easy to install mounting bracket, instructions and screws included. The battery is easy to insert. No Handyman Required. The alarm must go off at low concentrations of carbon monoxide. Some models do not go off until a super-high concentration of 400 ppm has been reached. That is very dangerous. OSHA regulations limit workplace concentrations to 50 ppm, so should your alarm. Click the Buy Button Above to Order Yours Today and Be Protected The next day to come!
USING THE LATEST TECHNOLOGY. Electrochemical technology sensor detects CO concentrations low enough to fully protect you from the silent killer. And YES for you Geeks, it meets both EN50291 and UL2034 standards.
QUALITY GUARANTEED. To guarantee the quality of our CO Alarms all the way through large-scale production, we implement the TQC (Total Quality Regulate) procedure, from IQC and IPQC to FQC. Every detector is individually tested and calibrated to ensure the compliance with the standards.
EXTREMELY RELIABLE! Powered by 9 Volt block alkaline battery, which is EASY to insert and remove. Has low battery warning, fault signal warning, self-test button to verify that it’s working. Supplied battery life expectancy is 3 years.
EASY TO INSTALL – comes with quick fix mounting bracket, screws, and instructions for easy and quick installation – no handyman required. Our specialized Carbon Monoxide Alarm is designed to be installed where it is going to do the most good – at light switch level or even lower if used in a bedroom. CO is almost the same density as air. It doesn’t ‘rise’ to the ceiling like smoke, unless the air is heated.
5 YEAR LIMITED WARRANTY – Also backed by a 100% Satisfaction Money Back Guarantee! It’s also Environmentally Friendly as we utilise non-radioactive technology.