Description

Performance parameters:

Frequency response: 30-15000 Hz

Sensitivity: -40 dB (0dB = 1 V/Pa at 1 KHZ)

Pointing to the features: single directional x 2

Output impedance: 200ω (Ohm)

Signal-to-noise radio: 76 dB (1 KHZ at 1 PA)

The loudest level: 120 dB at 1 KHZ harmonic distortion in 1% or less)

Power supply: 3V DC

Specifications:

Type: MS (Mid – Side) stereo wire

Length of cable: About 11.02 inch / 28cm

Power requirements: 3V CR2 battery

Battery life: About 800 hours (at room temperature, using packing attached 3V CR2 lithium battery)

Size: 5.12 x 2.36 x 1.38 inch / 13 x 6 x 3.5cm (L x W x H) (not including conductor)

Package size: 8.07 x 4.92 x 1.57 inch / 20.5 x 12.5 x 4cm (L x W x H)

Color: Black

Net Weight: About 45g (not including battery)

Gross Weight: 4.2 oz / 119 g

Size: 30.5 * 61 * 132.5mm

Accessories: 3V CR2 lithium battery x 1; operating instructions x 1

Pay attention:

If this microphone is not connected with your D-SLR camera, after you put the battery inside and push the button, the indicator LED will flash for a second only.

If this microphone is hooked up with your D-SLR camera, the indicator LED will keep dark right through recording. And if the indicator LED keep flash, it means the battery is too weak and you want to change a new battery.

Even as the use of, please kindly purchase extra batteries as spare ones because the attached battery is not rechargeable, and the capacity would possibly not full, and it’s for test purpose only.
The microphone may also be fixed on the DV with microphone hole and path. The MS stereo system enables a natural sound pick-up. Delivering a stereo sound image with superb clarity
The pickup pattern (affecting the soundstage width) may also be set to 90 or 120 according to the sound
Fit any device that have 3.5mm MIC socket and hot shoe
Frequency response: 30-15000 Hz
Sensitivity: -40 dB (0dB = 1 V/Pa at 1 KHZ)