Samsung knows most new parents get stiff necks from staring in awe at the child in their arms. SafeVIEW gives you a chance to stretch a bit ─ but still enjoy your favorite view. The parent monitor features simple controls that direct the camera to zoom in and out, pan to 300° left and right, or tilt 100° up or down. In the nursery, PTZ lets you point the camera to see if the baby is in point of fact asleep, know when the covers get kicked off, keep track of others in the room, or check if the door is closed. So go ahead, do some neck and shoulder rolls, and know that SafeVIEW has you covered!

The Samsung SafeVIEW camera has night vision capability up to 15 feet the use of invisible infrared LED lights, so you’ll regulate your baby even in low-light conditions. The camera’s sensors detect light levels and adjust the image for optimal picture. When middle of the night is just a little too dark for your baby’s peace of mind, use your parent monitor to remotely activate the soft, calming night-light if the room needs a little glow.

The Pure Digital Signal utilizes 2.4 GHz frequency to provide safe and interference-free video. Unlike other devices, the Pure Digital Signal cannot be interrupted by wireless routers, microwaves, or cordless phones. Be assured that, within a range of 900 feet*, you have the freedom to do what you want to around the house without losing contact with your little one. The monitor displays an “Out of Range” warning should it ever lose contact with the camera. * Range depends on obstacles between camera and monitor. The Samsung SafeVIEW monitor goes beyond just listening. Its built-in mic lets you coo back, sing a lullaby or let your little wonder know you’re close by or on your way. The voice activated (VOX) Quiet Mode reduces white ambient noise that comes through the monitor. Set the sound sensitivity level to be alerted only to the sounds that in point of fact matter.

Don’t want to miss even the softest coos? The monitor’s Sound Level Indicator flashes LED lights when sound is detected. The louder the sound, the more LEDS, so even in a noisy room, you’ll know when baby needs attention. The SafeVIEW Monitoring System is easy to set up and even easier to use. The camera runs on A/C power even as the monitor uses an internal rechargeable battery. Just charge and go. Samsung’s custom, user-friendly interface makes navigating through the options a snap. The system can monitor up to 3 additional cameras. In Scan Mode, the screen alternates between views from each camera at continual, pre-set intervals. Press the Sleep button to turn off the monitor screen and save battery power. The monitor will continue to detect sound around the camera even when the screen is off. Simply press any button to turn the screen on again.