Castle Creations Mamba Max Pro 1/10 Brushless ESC with SMARTSENSE Model: CSE010-0066-00
$158.67
SmartSense uses the motor sensors to start the motor and then it switches over to Castle?s ultra
CHEAT MODE, Castle?s High Energy Advanced Timing allows users to electronically advance their
6S (25.2 volts) max input voltage, Size: 45.5mm 36.5 21.5mm (1.79 inches x1.44 inches x0.85 inches
- Description
- Reviews (0)
Description
Key FeaturesSensored/Sensorless ESC 10th scale; ROAR legalSwitching BEC allows up to 6S lipoBuilt-in Cooling FanCompatible with Castle Link PC programming softwareOverviewSMARTSENSE brings the most productive of sensored and sensorless ESC together to create the ideal controller for serious 1/10th scale enthusiasts. Operating at up to 6S, Mamba Max Pro can care for nearly twice the power of the market standard Mamba Max!SmartSense uses the motor sensors to start the motor and then it switches over to Castle’s ultra powerful and efficient dynamic sensorless mode which boosts motor efficiency. Simply put, you can get more power and less heat from your motor.Sensored Only mode runs sensored motors the usage of sensored timing only.CHEAT MODE, Castle’s High Energy Advanced Timing allows users to electronically advance their sensored motor’s timing to extreme settings. This can regularly yield just that extra bit of power needed to win the race. Be careful-extra power comes with extra motor heat!CHECK OUT THE FOLLOWING FEATURES:*6S (25.2 volts) max input voltage *Switching BEC powers your radio and servo the entire way up to the 6S max input. Users may select the output for any voltage between 5V and 7V. *Durable case and cooling fan to give protection to and cool the controller throughout hard off-road action *Ready to Run: Mamba Max Pro is ready to run out of the box. *Castle Link Compatible: Like all Castle controllers, the Mamba Max Pro can also be tuned for the drivers’ preferences in the throttle curve, brake strength, reversing modes and more. Access these features with the CASTLE LINK USB connector (sold one after the other) and a PC for even more versatility.
SmartSense uses the motor sensors to start the motor and then it switches over to Castle?s ultra
CHEAT MODE, Castle?s High Energy Advanced Timing allows users to electronically advance their
6S (25.2 volts) max input voltage, Size: 45.5mm 36.5 21.5mm (1.79 inches x1.44 inches x0.85 inches
Switching BEC powers your radio and servo the entire way up to the 6S max input. Users may select the
Durable case and cooling fan to give protection to and cool the controller throughout hard off-road action
Be the first to review “Castle Creations Mamba Max Pro 1/10 Brushless ESC with SMARTSENSE Model: CSE010-0066-00”
Related Products
-
Fortrezz SSA2USR Siren Strobe Alarm Wireless Z-wave Red Lense
Can be used in an exsisting Home Security System with generic Z-Wave to RS 232 bridge.
SSA will emit a loud audible alarm > 110dB@1m, and an intense strobe light when an alarm signal is received from a device in the Z-Wave Home Network.
Speaks Z-Wave and as a Z-Wave Certified product allows for full operation with other Z-Wave enabled devices.$55.00$43.75 -
Castle Creations 010-0066-07 Mamba Max Pro ESC with 5700kV 4-Pole Motor
ROAR-legal for 1/10 scale applications SMARTSENSE operation combines the best features of sensored and sensorless ESCs
Handles up to 6-cell (6S) LiPos
Switching BEC provides power for servos and receivers$229.99$184.42 -
Iris Safe and Secure Kit
A self-monitored security system that includes free basic monitoring
Monitor and control your system from your smartphone, computer or tablet
Easy DIY installation and setup in as little as an hour$179.00$132.00 -
SmartSense Multi Sensor
$54.00The Multi can detect movement as in open/close, vibration, orientation or angle, and temperature all in one
Know if a door, window, cabinet, or drawer opens unexpectedly
Know the temperature in any room or location -
GE Z-Wave Wireless Lighting Control Duplex Receptacle
Easily replace any standard wall outlet with the GE Z-Wave controlled duplex receptacle to control lighting or small appliances with your mobile device or computer using any Z-Wave certified gateway
White lighting control matches most standard wall plates (wall plate not included)
Easily locate the receptacle in a dark room with the integrated blue LED indicator$64.99$38.84 -
Philips 259960 Friends of Hue Personal Wireless Lighting Iris Single, Frustration Free
$99.95The Friends of Hue Iris uses LED technology to deliver up to 80 percent energy savings and a long life of 20,000 hours (up to 18 years)
Gives you total control over your lighting from your smart phone or tablet – even when you’re away from home
Through your smart phone or tablet, recreate millions of different colors, set timers and alarms, connect to a variety of apps and dim the light (cannot be used with conventional dimmers) -
Broan SSQTXE080 Smart Sense Fan with Control, White Grille
BROAN SmartSense automatically coordinates the operation of ventilation fans, running them intermittently throughout the day when necessary
6-Inch ducting
Motor engineered for continuous operation$278.70$142.58 -
Texas Fluorescents SS213A232MV-F13T5-EM SS213 Series SmartSense 2-Light 32W T8 Wall Mount, White Finish
48IN long x 4.5IN high x 4.4IN wide
Requires two (2) 32W T8 linear fluorescent lamps
White finish and white acrylic lens$478.17$416.82 -
SmartSense Presence Sensor
$31.00Receive push or text notifications when people and pets approach and leave a specified area – such as a home or office
Put a Smart Sense Presence sensor in your child’s backpack and be notified when he/she arrives home from school or hasn’t arrived home when expected
Get an alert if your dog or cat unexpectedly leaves your home while you’re at work -
Aeon Labs Aeotec Z-Wave Door/Window Sensor, 2nd Edition (DSB29-ZWUS)
$38.95Fantastic wireless range – The Door & Window Sensor is completely wireless. Despite its small size, it’s powerfully so. It uses a special Z-Wave wireless signal that aims to cause no interference with other technologies in your home. That same wirless signal is ultra-low power, helping the battery last for years. And it does all of this with an antenna that can communicate over 300 foot / 90 metres in an open space.
Small in size – It attaches to your doors. It attaches to your windows. And, despite its beautiful curves, you don’t want to notice it. You want the Door & Window sensor to blend in, to become part of your home’s décor. That’s why we’ve made the 2nd generation sensor smaller than the first. We’ve reduced all its measurements without reducing its functionality. It’s smaller still, and it just looks better.
Simple DIY installation – The Door & Window Sensor is light. So light, in fact, that you can install it using only double sided sticky tape. Of course, there are other options, including screws. And you’ll find them all in the packet. All you’ll need is a screw driver and five minutes of your day.
Reviews
There are no reviews yet.