Description

Features:

Floureon Brand and High Quality

LCD Displayer with a Blue Ground Light.

Loud 85 decibel alarm

Permanent Carbon Monoxide Sensor

The Alarm Sound Pattern is Three Short Alarm Beeps. The Red LED Will Flash Even as within the Alarm Mode.

One chirp each 30 seconds in an indication that the battery is low (need replacement) (green LED still flashes once each 30 seconds).

Test/Reset button to check the unit electronics and verifies proper unit operation and reset the unit throughout CO alarm.

Alarm memory feature:

If the unit ever alarms, pressing the button, green LED will flashes once each second for one minute and the peak alarm level will likely be indicated at the LCD.

Green and red LED lights that indicate normal operation and alarm status.

The unit will sound chirp and red LED flashes once as power up.

Green LED

Flashes each 30 seconds to suggest the unit is operating properly. The green LED will even flash before CO reading is taken and when any button is pressed.

Red LED

When a dangerous level of carbon monoxide is detected the red LED will pulse and a loud alarm pattern will sound.

Specifications:

30ppm, Alarms within 120 Minutes

50ppm, Alarms within 60~90 Minutes

Sensitivity & Time

100ppm, Alarm within 10~40 Minutes

300ppm, Alarms within 3 Minutes

Standby Current <40uA
Alarm Current <30mA
Power Supply 3* AA Batteries (No Batteries Include)

Operation Ambient Condition -10~40°C, 20~90%25R.H
LCD Displayer with a Blue Ground Light
Loud 85 decibel alarm. Permanent Carbon Monoxide Sensor.
The Alarm Sound Pattern is Three Short Alarm Beeps. The Red LED Will Flash Even as within the Alarm Mode. One chirp each 30 seconds in an indication that the battery is low (need replacement) (green LED still flashes once each 30 seconds).
Package Content: 1X Floureon Carbon Monoxide Alarm / 2X Screws / 1X English User’s Manual.
Easy to put in. Instructions were detailed, informational, and well written.