Description

Description:

It is a perfect item for protecting your circle of relatives from the danger of carbon monoxide and easy to read with the digital dispaly, even in a low light condition.

Features:

1. Loud 85 decibel alarm

2. Permanent Carbon Monoxide Sensor

3. The Alarm Sound Pattern is Three Short Alarm Beeps. The Red LED Will Flash Whilst in the Alarm Mode

4. One chirp each and every 30 seconds in an indication that the battery is low (need replacement) (green LED still flashes once each and every 30 seconds)

5. Test/Reset button to test the unit electronics and verifies proper unit operation and reset the unit throughout CO alarm

6. Alarm memory feature: If the unit ever alarms, pressing the button, green LED will flashes once each and every second for one minute and the peak alarm level will be indicated at the LCD

7. Green and red LED lights that indicate normal operation and alarm status

8. The unit will sound chirp and red LED flashes once as power up

9. Green LED:Flashes each and every 30 seconds to indicate the unit is operating properly. The green LED will also flash before CO reading is taken and when any button is pressed

10. Red LED :When a dangerous level of carbon monoxide is detected the red LED will pulse and a loud alarm pattern will sound

Specification:

Power Supply:3AA size 1.5V batteries

Sensitivity & Time: 50ppm, alarms within 60~90 minutes

100ppm, alarms within 10~40 minutes

300ppm, alarms within 3 minutes

Standby Current:<50Ua(withoutLCD); ＜200uA(with LCD)
; Alarm Current:<75mA
; Operation Ambient Condition:5~40℃,20~90％ R.H.

When a dangerous level of carbon monoxide is detected the red LED will pulse and a loud alarm pattern will sound.
Standby: Green Led flashes once each and every 30 seconds. Alarm: Red Led quickly flashes 4 times with unit chirping each and every 5 seconds, then repeat.
Sensitivity/Alarm Time: <20ppm,LCD displays 0ppm. 50ppm, alarms within 60~90 minutes. 100ppm, alarm within 10~40 minutes. 300ppm, alarms within 3 minutes. A test / reset button means that you can test that alarm is functioning properly. Plus a peak-level memory helps to keep track of the maximum CO level detected between resets. The CO detector is a battery-operated independent carbon monoxide (CO) alarm and with the inside carbon monoxide sensor to lend a hand give protection to you and your circle of relatives from the dangers of CO.The detector is easy to install and use .In a CO emergency, the red LED pulses and an 85 db horn sounds at specific intervals until the CO threat is eliminated. [amz_corss_sell asin="B009P0P9EI"]