Description

The AC-powered, hardwired Kidde i12080 ionization smoke alarm is designed to offer protection to you and your family from the dangers of smoke and fire. This smoke alarm’s trademarked hush feature means that you can silence nuisance alarms, at the same time as an indicator LED and test feature will let you easily confirm that the alarm is working. This wire-in smoke detector also has a battery-backup feature (with included 9-volt battery) in addition to a safety light that helps illuminate your path to safety. Kidde i12080 The Kidde i12080 is equipped with an integrated safety light. At a Glance i12080 Hardwire Smoke Alarm At a Glance: Ionization sensing technology detects invisible fire particles Battery backup for continuous protection in case of power outage (battery included) Safety light illuminates your path to safety Smart hush feature silences nuisance alarms Pre-stripped wiring harness with tinned strands 10-year limited warranty At a Glance Features The Kidde i12080 smoke alarm includes a safety light feature that provides 15 minutes of light when the alarm is sounding. It offers a tamper-resistant feature to deter vandalism or theft and a smart interconnect system that connects with up to 24 Kidde devices–including other smoke alarms plus carbon monoxide and heat alarms. The battery-backup feature (9-volt battery included) provides protection even All through power outages, when many CO incidences occur. It has a large mounting base that helps offer protection to surface paint from dirt and covers imperfections, and its pre-stripped wiring harness has an easy-off cap and tinned strands to increase conductivity. By pressing the hush button, you’ll be able to easily and safely silence nuisance alarms caused by non-emergency situations, such as overcooked dinners. This feature desensitizes the alarm for approximately seven minutes. All through this time, the alarm chirps every 30 to 40 seconds. If the smoke is too dense, the hush feature is overridden and the alarm still sounds, and the alarm automatically resets at the end of the seven minutes. This convenient safety measure eliminates the temptation to take away the alarm’s battery, which creates an unsafe situation. The Kidde i12080 smoke alarm uses ionization sensing technology, which typically detects invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde recommends that both ionization and photoelectric smoke alarms be installed to insure maximum detection. What’s in the Box One Kidde i12080 120V AC wire-in smoke alarm, one 9-volt battery, and operating and installation instructions. Kidde i12080
Safety light illuminates when alarm sounds to help guide you and your family to safety
Hush Feature temporarily silences nuisance alarms
Battery backup two 9V batteries included
Test button tests unit’s electronic circuitry
Kidde?s smoke alarms meet the requirements of Underwriters Laboratories (UL), an independent facility that tests products for compliance with widely-accepted safety standards