BOSS Audio EQ1208 4 Band Amplified Equalizer with Subwoofer Control
$65.00 $27.10
Type: APMLIFIED
RCA Inputs: Front, Rear, Subwoofer
EQ Bands: 4
- Description
- Amazon Customer Reviews
- Reviews (0)
Description
View larger
Front Panel Controls
- CD/Radio Selector: This button permits you to make a choice the equalizer input source. The unit features separate rear panel RCA inputs for radio and CD/DVD players.
- Illumination Selector: This button permits you to make a choice the color of the front panel illumination.
- Master Volume Regulate: Use this Regulate to adjust the overall output volume level.
- Fader: Use this Regulate to balance the sound level between front and rear speakers as desired.
- Subwoofer Volume: This Regulate allows you to increase or decrease the output level of the subwoofer channel.
- Subwoofer Frequency: Use this knob to set the crossover frequency for the subwoofer output channel (it is for a lowpass filter).
- Boost/Cut Controls: Each of these controls represents a range of frequencies surrounding a center frequency to cover the audio spectrum from subwoofer to treble. Adjust these controls to fit your taste and listening environment. Each center frequency will also be adjusted +/- 18 dB.
Specifications
- EQ center frequencies: 60Hz, 150Hz, 400Hz, 1kHz, 3kHz, 6kHz, 15kHz
- Equalization range: (boost/cut) +/- 12dB
- Frequency response: 20 Hz – 20kHz
- Subwoofer crossover frequency: variable 30-20Hz
- Signal to noise ratio: 60 dB
- Equalizer THD: less than 0.05%
- Subwoofer channel THD: less than 0.05%
- Channel separation: 45 dB
- Power supply: 10-16V negative ground
- Output voltage (subwoofer channel only): 1.5V
- Dimensions: 6.8” W x 4.25” D x 1.1” H
View larger
Top Panel Controls
- Radio and CD Input Gain Controls
- These controls will let you balance the input gain from your input sources independently.
- Phase Shift Selector: Choose either 0º or 180º to correct for time alignment issues in your audio system.
How An Equalizer Is Used
The EQ1208 graphic equalizer is a high-fidelity signal processor/preamplifier that that permits you to graphically view and individually Regulate quite a few different frequency bands in a stereophonic system. It is intended to be used in a car audio system which includes amplifiers in the signal path after the equalizer, and provides front, rear, and subwoofer low level outputs via RCA connectors. The EQ1208 consists of several audio filters, each centered at a specific frequency in the audio range. It enables you to cut or boost the output level by up to 18 decibels as desired at the following frequencies: 40Hz, 150Hz, 1kHz, or 20kHz. The EQ1208 also features a subwoofer channel with an independent crossover Regulate. The crossover will also be set from 30Hz to 250Hz. Any signal below the frequency setting will be sent to the subwoofer outputs, allowing you to optimize the sound to fit your particular subwoofer setup. Use of the subwoofer channel is optional.
Type: APMLIFIED
RCA Inputs: Front, Rear, Subwoofer
EQ Bands: 4
Remote Subwoofer Level Regulate
Number of Channels: 2
+/-EQ Range: 118
RCA Outputs: Front, aux
Frequency Response: 20 to 20 Hz
Output Voltage: 7 Volts
Signal-to-Noise Ratio: 105 dB
Center Frequencies: 40, 150, 1, 20, , , , , ,
Low-Level Input Voltage: 10 Volts
Fader Regulate
High-Level Input Voltage: 16 Volts
Total Harmonic Distortion @ RMS Output: 0.05%
4 Bands Preamp Equalizer
RCA Input; Subwoofer output
Subwoofer level Regulate, Yes; Preamp/amplified, amplified
Night illumination
Subwoofer Level Regulate
Frequently Bought Together
-
This item: BOSS Audio EQ1208 4 Band Amplified Equalizer with Subwoofer Control$0.00
-
$0.00
-
$54.00
-
$0.00